Monthly Archives: July 2017

Propeller Straightening – June 2017

One morning in June, SGS Vancouver was contacted by a vessel in nearby Victoria, that was reporting excessive engine load and a significant shaft rate vibration. A dive team, including a Level III Propeller Service Engineer, were mobilized and onsite later that afternoon.

The initial inspection revealed that a large deflection in one trailing edge tip was the source of the engine loading and vibration. Our Propeller Service Engineer discussed repair options with the vessel’s Chief Engineer and Superintendent in the Far East. The client advised they would contact the propeller OEM to seek their advice, who in turn confirmed that SGS is their authorized underwater service provider, and that underwater straightening would indeed be their best option. The next morning, the repair was fully authorized and the vessel repositioned to Vancouver anchorage as it was the most cost effective location with suitable conditions for the repair.

Although our large press system was in Halifax, on the east coast of Canada completing another repair job for another client, we were able to expedite overnight service, delivering the press to our dive support barge by 0500 hrs one day after we completed the inspection. Within 6 hours of the works beginning (and less than 80 hours after the initial call), the job was completed to the satisfaction of the attending surveyor. The deflected section of the blade was restored to design geometry, along with a grinding and fairing repair of minor mechanical contact damage. Following a sea trial, the vessel’s Chief Engineer reported that all engine parameters and vibration levels had been restored to pre-damage values, and the vessel continued the voyage to Asia with a complete permanent propeller repair.

Deflected blade before straightening

Trailing edge after straightening

Unrivaled service at a moment’s notice has become the cornerstone of what we can provide for you at SUBSEA GLOBAL SOLUTIONS. We are ready to support your needs around the world, at any time.

Thruster Changeout – July 2017

Over Canada Day, one of the many cruise vessels that pay a visit to Vancouver required service. During a normal port stay the SGS Vancouver team was tasked with removing one of the bow thrusters from the vessel. In order to carry out the extraction in a timely fashion, all preparation work was carried out a week earlier by a SGS team while the vessel was cruising in Alaska. In Vancouver, the thruster removable gear / propeller assembly was removed from the gear case and transferred to an awaiting crane. The thruster is currently being reconditioned by a local workshop together with the OEM technicians. When completed, the thruster will be reinstalled by SGS divers during a voyage layover. The experience was made especially memorable with Canada Day fireworks overhead while rigging the thruster from the water.

Subsea Global Solutions is your trusted resource to deliver unrivaled service anywhere and at any time globally.  We look forward to supporting your emergency and maintenance needs throughout the world.